New! Sign up for our free email newsletter.
Science News
from research organizations

Researchers demonstrate new sensors by creating novel health monitoring, machine interface devices

Date:
January 3, 2023
Source:
North Carolina State University
Summary:
Researchers have developed a stretchable strain sensor that has an unprecedented combination of sensitivity and range, allowing it to detect even minor changes in strain with greater range of motion than previous technologies. The researchers demonstrated the sensor's utility by creating new health monitoring and human-machine interface devices.
Share:
FULL STORY

Researchers at North Carolina State University have developed a stretchable strain sensor that has an unprecedented combination of sensitivity and range, allowing it to detect even minor changes in strain with greater range of motion than previous technologies. The researchers demonstrated the sensor's utility by creating new health monitoring and human-machine interface devices.

Strain is a measurement of how much a material deforms from its original length. For example, if you stretched a rubber band to twice its original length, its strain would be 100%.

"And measuring strain is useful in many applications, such as devices that measure blood pressure and technologies that track physical movement," says Yong Zhu, corresponding author of a paper on the work and the Andrew A. Adams Distinguished Professor of Mechanical and Aerospace Engineering at NC State.

"But to date there's been a trade-off. Strain sensors that are sensitive -- capable of detecting small deformations -- cannot be stretched very far. On the other hand, sensors that can be stretched to greater lengths are typically not very sensitive. The new sensor we've developed is both sensitive and capable of withstanding significant deformation," says Zhu. "An additional feature is that the sensor is highly robust even when over-strained, meaning it is unlikely to break when the applied strain accidently exceeds the sensing range."

The new sensor consists of a silver nanowire network embedded in an elastic polymer. The polymer features a pattern of parallel cuts of a uniform depth, alternating from either side of the material: one cut from the left, followed by one from the right, followed by one from the left, and so on.

"This feature -- the patterned cuts -- is what enables a greater range of deformation without sacrificing sensitivity," says Shuang Wu, who is first author of the paper and a recent Ph.D. graduate at NC State.

The sensor measures strain by measuring changes in electrical resistance. As the material stretches, resistance increases. The cuts in the surface of the sensor are perpendicular to the direction that it is stretched. This does two things. First, the cuts allow the sensor to deform significantly. Because the cuts in the surface pull open, creating a zigzag pattern, the material can withstand substantial deformation without reaching the breaking point. Second, when the cuts pull open, this forces the electrical signal to travel further, traveling up and down the zigzag.

"To demonstrate the sensitivity of the new sensors, we used them to create new wearable blood pressure devices," Zhu says. "And to demonstrate how far the sensors can be deformed, we created a wearable device for monitoring motion in a person's back, which has utility for physical therapy."

"We have also demonstrated a human-machine interface," Wu says. "Specifically, we used the sensor to create a three-dimensional touch controller that can be used to control a video game."

"The sensor can be easily incorporated into existing wearable materials such as fabrics and athletic tapes, convenient for practical applications," Zhu says. "And all of this is just scratching the surface. We think there will be a range of additional applications as we continue working with this technology."

The work was done with support from the National Science Foundation, under grant number 2122841; the National Institutes of Health, under grant number R01HD108473; and the U.S. Department of Defense, under grant number W81XWH-21-1-0185.


Story Source:

Materials provided by North Carolina State University. Original written by Matt Shipman. Note: Content may be edited for style and length.


Journal Reference:

  1. Shuang Wu, Katherine Moody, Abhiroop Kollipara, Yong Zhu. Highly Sensitive, Stretchable, and Robust Strain Sensor Based on Crack Propagation and Opening. ACS Applied Materials & Interfaces, 2022; DOI: 10.1021/acsami.2c16741

Cite This Page:

North Carolina State University. "Researchers demonstrate new sensors by creating novel health monitoring, machine interface devices." ScienceDaily. ScienceDaily, 3 January 2023. <www.sciencedaily.com/releases/2023/01/230103160455.htm>.
North Carolina State University. (2023, January 3). Researchers demonstrate new sensors by creating novel health monitoring, machine interface devices. ScienceDaily. Retrieved October 31, 2024 from www.sciencedaily.com/releases/2023/01/230103160455.htm
North Carolina State University. "Researchers demonstrate new sensors by creating novel health monitoring, machine interface devices." ScienceDaily. www.sciencedaily.com/releases/2023/01/230103160455.htm (accessed October 31, 2024).

Explore More

from ScienceDaily

RELATED STORIES